Antenna, Stainless Steel, 630mm Long, 144 ~ 148MHz, Tunable
Stainless steel 1/4 wave antenna suitable for 2m band and high band VHF applications tunable from 108MHz. This antenna is not pre-tuned and comes with a cutting chart for customer tuning. The SW2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMB mount. (Z brackets are not recommended with this antenna)
Recommended Accessories - UL12BNC or UL12C with BMB or Mag12C
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.